RiffTrax Forum
 

Blue Screen of Death

Started by CJones, December 23, 2018, 02:49:08 PM

Previous topic - Next topic

CJones

I've had this computer at least 5 years, and it never BSoD'ed me until 6 months ago. Since then it's done this 4 times.

The only relevant error code I had enough time to write done was WHDA.

Does anyone have any advice?

ihavemyreasons

Which version of Windows? 7, 8, 10? And mechanical hard drive or SSD?

CJones

Quote from: wihogfan on December 23, 2018, 04:00:32 PM
Which version of Windows? 7, 8, 10? And mechanical hard drive or SSD?

Windows 10, and I have both drives, but the machine boots from the HDD 

MartyS (Gromit)

Did you mean WHEA error? 

Run a full scan (error checking) on all disks, see if that finds any issues.

Use something like Core Temp to look at your CPU temperature(s), to see if they are overheating.  Have you ever blown dust out of the CPU heat exchanger?

Windows 10 has a memory diagnostic to check your ram, here's a page on how to run it:

https://www.windowscentral.com/how-check-your-pc-memory-problems-windows-10

Random ram issues can sometimes be fixed by simply pulling and reinserting the ram modules. 

CJones

#4
I will those suggestions out. Thanks :)

And yes. I did mean WHEA.

CJones

So it looks like my overclocking is what was causing it. Since I disabled it I haven't seen any issues.

But it's odd, I've been running this computer OCed for 3 years, but only now has it been giving me trouble. The heat sink is probably at fault. When I get the chance I'll take it apart and clean it.

MartyS (Gromit)

Quote from: CJones on December 24, 2018, 05:49:15 PM
So it looks like my overclocking is what was causing it. Since I disabled it I haven't seen any issues.

But it's odd, I've been running this computer OCed for 3 years, but only now has it been giving me trouble. The heat sink is probably at fault. When I get the chance I'll take it apart and clean it.

Could be dust blocking airflow, the fan wearing out and running slow, or the thermal paste has lost it's effectiveness. I've been using the stuff with diamond powder in it and that gave me the lowest temperatures.

Do you have a fan/temperature monitor program, "core temp" is free:
https://www.alcpu.com/CoreTemp/